Products

Precision Board offers significant advantages to wood. It is a rigid, closed cell, high density urethane material. It can be sandblasted, routed, carved or used in any other typical wood application.

Precision Board is not affected by solvents and works well indoors as well as outdoors.

Precision Board is completely waterproof. It is extremely durable and will not crack, twist, curl or dry rot during long term weather exposure. High or low environmental temperatures, rain, snow, ice or frequent sprinkler waterings have no effect on this state-of-the-art material.

Features:

	Unaffected by solvents
	Easily butt bonded or laminated
	Does not warp, crack, twist or dry rot
	Uniform density simplifies fabrication
	Accepts all sign paints including lacquers

Precision Board is available in sheet sizes of 4´ x 8´ and 4´ x 10´, s 5´ x 8´ and 5´ x 10´ and thicknesses from 1/2´´ to 20´´. Standard densities include 4, 6, 10, 15, 18, 20, 30 and 40 pounds per cubic foot. Custom sizes and densities are available by special order.

Companion Products:

	FSC-88 Primer/Filler - solvent based. Brush/Roll/Spray Grade.
	FSC-88 WB Primer/Filler - water based. Brush/Roll/Spray Grade.
	FSC-360 WB Crack Filling and Repair Material - water based. Putty Knife Grade.
	TSF-45 Texturing coating that stays flexible - water based. Great for adding wood grain, stucco, etc.
	PB Bond-240 Urethane Adhesive - one part.
	PB Fast Set Urethane Adhesive - one part, 30 min cure
	EP-75 Epoxy Adhesive and Potting Maerial - two part.
	PB Resin - clear coat for creating a fast ultra smooth surface. No Priming or sanding required.

For technical questions or additional information call: hdu@precisionboard.com

PH. (800) 845-0745

Retrun to Home Page